Refrigerant R410a, 410, R410, 410a, Large 38 oz Can, Recharge Kit, Instructions

Description

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
Refrigerant R410a, 410, R410, 410a, Large 38 oz Can, Recharge Kit, Instructions
This item will be shipped ORM-D (which requires the package be marked as such, AND IT WILL BE!) with domestic shipping only.
We are a Certified UPS Haz Mat Shipper.
This kit is especially designed for the "Do-It-
Yourself-er
"
Includes
DETAILED
charging and testing instructions.
This kit is for recharging or topping off a Refrigerant R-410a System.
Refrigerant R410a is used on almost all "NEW" A/C Units and almost all of the new "mini-split"  A/C systems.
As R-22 is being phased out, R-410a is now the refrigerant found on all "NEW" A/C Systems.
This recharge kit includes;
(1) LARGE 38 oz. Can of R-410a with a 1/4" male flare fitting on top with internal valve core and brass cap as pictured.
(1) Reusable , Quick Connect (screw-on), Top Mount Can Taper with on/off valve and 1/4" male flare hose connection.
(1) Detailed Instructions.
(1)  SPECIAL, M115 Cylinder, CGA-C10 Top Mount Can Taper (Reusable).
(1) CPS AD87 R410a adapter Fitting
(1) 36" Charging Hose
(1) Instructions on R410a systems.
(1) Thermometer for checking the suction line temperature, this is a very important step which is mentioned
in the instructions.
(1) 1 Foot piece of foam tape used to attach the thermometer to the suction line. (see picture)
Normal R410a low-side system pressure while unit is running is; 125 to 150 psi. depending on the outdoor and indoor temperature.
Some R410a systems still use the 1/4" male flare so in this case the charging hose with this kit will connect directly onto it.
The charging hose on this kit has the larger 5/16" connection with valve core depressor.
You will need this special hose because the new size found on almost all mini-splits and some R410a A/C systems is now larger (5/16") to prevent mixing,  so now you will have everything you need to recharge a R410a system.
R410a Refrigerant does NOT require EPA certification to purchase.
FOR USE ONLY IN AIR CONDITIONING SYSTEMS DESIGNED FOR R410A.
DO NOT MIX WITH ANY OTHER REFRIGERANT.
Refrigerant Can Notes
**WARNING**
*ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS.
*ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS.
*CONTENT UNDER PRESSURE.
*VAPOR HARMFUL SKIN AND EYE IRRITANT.
DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO
BURST AND RESULT IN SERIOUS INJURY.
ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT.
USE ONLY IN SYSTEMS DESIGNED FOR REFRIGERANT R410A.
DO NOT MIX WITH ANY OTHER REFRIGERANT.
FOR LOW PRESSURE SIDE OF THE SYSTEM ONLY!!!!
DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F.
HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST.
DO NOT PUNCTURE OR INCINERATE THIS CAN.
DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F.
Do not refill can.
KEEP OUT OF REACH OF CHILDREN.
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipmets.
This item will be shipped ORM-D (which requires the package be marked as such, AND IT WILL BE!) with domestic shipping only. We are a Certified UPS Haz Mat Shipper. This kit is especially designed for the "Do-It-Yourself-er" Includes DETAILED charging and testing instructions. This kit is for recharging or topping off a Refrigerant R-410a System. Refrigerant R410a is used on almost all "NEW" A/C Units and almost all of the new "mini-split" A/C systems. As R-22 is being phased out, R-410a is now the refrigerant found on all "NEW" A/C Systems. This recharge kit includes; (1) LARGE 38 oz. Can of R-410a with a 1/4" male flare fitting on top with internal valve core and brass cap as pictured. (1) Reusable , Quick Connect (screw-on), Top Mount Can Taper with on/off valve and 1/4" male flare hose connection. (1) Detailed Instructions. (1) SPECIAL, M115 Cylinder, CGA-C10 Top Mount Can Taper (Reusable). (1) CPS AD87 R410a adapter Fitting (1) 36" Charging Hose (1) Instructions on R410a systems. (1) Thermometer for checking the suction line temperature, this is a very important step which is mentioned in the instructions. (1) 1 Foot piece of foam tape used to attach the thermometer to the suction line. (see picture) Normal R410a low-side system pressure while unit is running is; 125 to 150 psi. depending on the outdoor and indoor temperature. Some R410a systems still use the 1/4" male flare so in this case the charging hose with this kit will connect directly onto it. The charging hose on this kit has the larger 5/16" connection with valve core depressor. You will need this special hose because the new size found on almost all mini-splits and some R410a A/C systems is now larger (5/16") to prevent mixing, so now you will have everything you need to recharge a R410a system. R410a Refrigerant does NOT require EPA certification to purchase. FOR USE ONLY IN AIR CONDITIONING SYSTEMS DESIGNED FOR R410A. DO NOT MIX WITH ANY OTHER REFRIGERANT. Refrigerant Can Notes **WARNING** *ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS. *ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS. *CONTENT UNDER PRESSURE. *VAPOR HARMFUL SKIN AND EYE IRRITANT. DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO BURST AND RESULT IN SERIOUS INJURY. ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT. USE ONLY IN SYSTEMS DESIGNED FOR REFRIGERANT R410A. DO NOT MIX WITH ANY OTHER REFRIGERANT. FOR LOW PRESSURE SIDE OF THE SYSTEM ONLY!!!! DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F. HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST. DO NOT PUNCTURE OR INCINERATE THIS CAN. DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F. Do not refill can. KEEP OUT OF REACH OF CHILDREN.
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
Refrigerant R410a, 410, R410, 410a, Large 38 oz Can, Recharge Kit, Instructions
This item will be shipped ORM-D (which requires the package be marked as such, AND IT WILL BE!) with domestic shipping only.
We are a Certified UPS Haz Mat Shipper.
This kit is especially designed for the "Do-It-
Yourself-er
"
Includes
DETAILED
charging and testing instructions.
This kit is for recharging or topping off a Refrigerant R-410a System.
Refrigerant R410a is used on almost all "NEW" A/C Units and almost all of the new "mini-split"  A/C systems.
As R-22 is being phased out, R-410a is now the refrigerant found on all "NEW" A/C Systems.
This recharge kit includes;
(1) LARGE 38 oz. Can of R-410a with a 1/4" male flare fitting on top with internal valve core and brass cap as pictured.
(1) Reusable , Quick Connect (screw-on), Top Mount Can Taper with on/off valve and 1/4" male flare hose connection.
(1) Detailed Instructions.
(1)  SPECIAL, M115 Cylinder, CGA-C10 Top Mount Can Taper (Reusable).
(1) CPS AD87 R410a adapter Fitting
(1) 36" Charging Hose
(1) Instructions on R410a systems.
(1) Thermometer for checking the suction line temperature, this is a very important step which is mentioned
in the instructions.
(1) 1 Foot piece of foam tape used to attach the thermometer to the suction line. (see picture)
Normal R410a low-side system pressure while unit is running is; 125 to 150 psi. depending on the outdoor and indoor temperature.
Some R410a systems still use the 1/4" male flare so in this case the charging hose with this kit will connect directly onto it.
The charging hose on this kit has the larger 5/16" connection with valve core depressor.
You will need this special hose because the new size found on almost all mini-splits and some R410a A/C systems is now larger (5/16") to prevent mixing,  so now you will have everything you need to recharge a R410a system.
R410a Refrigerant does NOT require EPA certification to purchase.
FOR USE ONLY IN AIR CONDITIONING SYSTEMS DESIGNED FOR R410A.
DO NOT MIX WITH ANY OTHER REFRIGERANT.
Refrigerant Can Notes
**WARNING**
*ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS.
*ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS.
*CONTENT UNDER PRESSURE.
*VAPOR HARMFUL SKIN AND EYE IRRITANT.
DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO
BURST AND RESULT IN SERIOUS INJURY.
ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT.
USE ONLY IN SYSTEMS DESIGNED FOR REFRIGERANT R410A.
DO NOT MIX WITH ANY OTHER REFRIGERANT.
FOR LOW PRESSURE SIDE OF THE SYSTEM ONLY!!!!
DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F.
HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST.
DO NOT PUNCTURE OR INCINERATE THIS CAN.
DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F.
Do not refill can.
KEEP OUT OF REACH OF CHILDREN.
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipmets.
This item will be shipped ORM-D (which requires the package be marked as such, AND IT WILL BE!) with domestic shipping only.
We are a Certified UPS Haz Mat Shipper.
This kit is especially designed for the "Do-It-
Yourself-er
"
Includes
DETAILED
charging and testing instructions.
This kit is for recharging or topping off a Refrigerant R-410a System.
Refrigerant R410a is used on almost all "NEW" A/C Units and almost all of the new "mini-split"  A/C systems.
As R-22 is being phased out, R-410a is now the refrigerant found on all "NEW" A/C Systems.
This recharge kit includes;
(1) LARGE 38 oz. Can of R-410a with a 1/4" male flare fitting on top with internal valve core and brass cap as pictured.
(1) Reusable , Quick Connect (screw-on), Top Mount Can Taper with on/off valve and 1/4" male flare hose connection.
(1) Detailed Instructions.
(1)  SPECIAL, M115 Cylinder, CGA-C10 Top Mount Can Taper (Reusable).
(1) CPS AD87 R410a adapter Fitting
(1) 36" Charging Hose
(1) Instructions on R410a systems.
(1) Thermometer for checking the suction line temperature, this is a very important step which is mentioned
in the instructions.
(1) 1 Foot piece of foam tape used to attach the thermometer to the suction line. (see picture)
Normal R410a low-side system pressure while unit is running is; 125 to 150 psi. depending on the outdoor and indoor temperature.
Some R410a systems still use the 1/4" male flare so in this case the charging hose with this kit will connect directly onto it.
The charging hose on this kit has the larger 5/16" connection with valve core depressor.
You will need this special hose because the new size found on almost all mini-splits and some R410a A/C systems is now larger (5/16") to prevent mixing,  so now you will have everything you need to recharge a R410a system.
R410a Refrigerant does NOT require EPA certification to purchase.
FOR USE ONLY IN AIR CONDITIONING SYSTEMS DESIGNED FOR R410A.
DO NOT MIX WITH ANY OTHER REFRIGERANT.
Refrigerant Can Notes
**WARNING**
*ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS.
*ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS.
*CONTENT UNDER PRESSURE.
*VAPOR HARMFUL SKIN AND EYE IRRITANT.
DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO
BURST AND RESULT IN SERIOUS INJURY.
ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT.
USE ONLY IN SYSTEMS DESIGNED FOR REFRIGERANT R410A.
DO NOT MIX WITH ANY OTHER REFRIGERANT.
FOR LOW PRESSURE SIDE OF THE SYSTEM ONLY!!!!
DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F.
HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST.
DO NOT PUNCTURE OR INCINERATE THIS CAN.
DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F.
Do not refill can.
KEEP OUT OF REACH OF CHILDREN.