NICE!! HAMMOND DUSKOLECTOR DUST COLLECTOR CYB-6D

Description

MACHINE IS IN WORKING CONDITION, CHECK THE PICTURES THEY'RE ALSO PART OF THE DESCRIPTION. ITEM IS AVAILABLE FOR INSPECTION AND IT'S CURRENTLY LOCATED AT THE CITY OF PICO RIVERA.
WE GET GREAT FREIGHT QUOTES, ASK US FOR ONE! OR USE YOUR OWN. THANK YOU FOR WATCHING!!
Made in the U.S.A. by Hammond Machinery Builders of Kalamazoo, Michigan.
This is a Duskolector Cyclone Dust Collector in Good Working condition.
Model #: CYB-6D
Hammond DusKolectors® are independent dust collectors used for isolated machines that cannot be connected to a central dust collection system, or where no central system is available. In operation, the DusKolector® draws the dirty air inside itself where the heavier particles are deposited in a dirt container at the bottom of the machine; either a tray or a 55-gallon drum. The air then goes through filters which remove the finer particles, and the filtered air returns to the room. There is no waste of energy exhausting heated or cooled air to the outside of the building.
The cyclone models range from 500 to 800 CFM. These models incorporate the centrifugal precipitation and gravitation principle. The heavier particles are deposited in the dirt container. The finer particles are captured in the bag(s). Filtered air exhausts through the bag back into the work area. Each bag has a zipper in the bottom for dust removal. The blower wheel, a self-cleaning paddle wheel, is located on the "clean air" side of the cyclone reducing wear, and is direct-driven by a 3600 RPM motor.
Specifications:
Inlet Diameter: 4"
Outlet Diameter: 6"
CFM: 300 / 500
Motor: 2 Horsepower, 200-230 / 460 Volt, 3,450 rpm, 3.2-3 / 1.5 Amps, 60 hz, Three Phase
Electrical: 230 Volt, Three Phase
Overall Dimensions: 45" x 18" x 52" tall
Comes as shown in pictures.