Acugauge H16 Adjustable Hand Reamer Kingpin Tool + Item is in the US!

Description

Hooray, your item is right here in Florida, USA!
Buy American and put American workers first!
Offered by Acugauge, an American ebay seller with 100% positive customer reviews - but don't take my word for it, see for yourself
Free Same-Day Shipping and Free U.S Returns
Min. Hole Size 1-13/16 in. | Max. Hole Size 2-7/32 in. | Overall Length 16 in. | 6 Blades
Blades made of M2 High Speed Steel (HSS)
Acugauge H16 (M) adjustable hand reamer blades can be sharpened and replaced as needed. Hand reamers are held with a tap wrench, adjustable wrench, or vise and slowly rotated to feed the reamer into the hole. Sometimes known as adjustable-blade reamers, adjustable hand reamers have a tendency to chatter and are a good choice for occasional reaming tasks or for light/heavy-duty reaming in assembly, automotive and maintenance operations. High-speed M2 steel (HSS) adjustable hand reamers offer good wear resistance in a wide range of reaming tasks and can withstand chatter or hard surfaces. These reamers have straight blades that push chips forward into the hole, so they are best suited for reaming through holes. The reamers' nuts and blades can be adjusted to allow the tool to enlarge or finish holes of different sizes in metal work-pieces. Users can adjust the tool on the job in applications where they're not sure exactly what size reamer they need, which helps prevent downtime. Hand reamers are held with a tap wrench, adjustable wrench, or vise and slowly rotated to feed the reamer into the hole. Min. Reamer Size 1-13/16 in., Max. Reamer Size 2-7/32 in., Overall Length 16 in.
TIPS AND TRICKS FOR USING ADJUSTABLE HAND KINGPIN REAMERS
Acugauge adjustable hand reamers are intended for hand use only - using them with power tools can cause damage to the reamer, the work piece, or yourself!!
Select the proper reamer and just the size if needed.
Mount the workpiece securely, such as in a vise. Attach a tap wrench to the reamer's square shank. In some cases, it might be easier to mount the reamer to the vise and turn the work piece.
Align the reamer with the hole and begin turning (clockwise for right hand cut reamers).
Apply even pressure while turning.
Generally, using a cutting fluid will improve your surface finish and prolong the life of the reamer.
Do not turn the reamer backwards even when removing it from the hole.
Don't take to heavy of a cut. .002-.005 per pass is typical, maybe more if reaming easy material.